+91-98150-04628, 91-98155-04628
info@rrmachinetools.com
E40 COLLET CHUCK (MT)
  • Made from 16MnCr5 & case hardened to 55-58 HRc approx.
  • Precision ground to an accuracy of 0.15 mm TIR.
  • Use C Hook spanner to avoid breakages.
  • Suitable for both Tail & Schaublin type collets.
  • Standard for both tails & schaublin type collets.
  • Tang type collet adaptor supplied only against specific request at extra cost.
  • Cotter slot can be provided in tang type collet adapter against request at extra cost.
Model No. Shank Taper Suitable for Collet L
mm
L1
mm
Ø D
mm
Ø D1
mm
M A/F
mm
MT-2 E-32 MT-2 E-32 64.0 80 54 17.780 M10 24
MT-2 E-40 MT-2 E-40 64.0 87 63 17.780 M10 24
MT-3 E-32 MT-3 E-32 81.0 80 54 23.825 M12 24
MT-3 E-40 MT-3 E-40 81.0 87 63 23.825 M12 24
MT-4 E-32 MT-4 E-32 102.5 69 54 31.267 M16 32
MT-4 E-40 MT-4 E-40 102.5 91 63 31.267 M16 32
MT-4 E-45 MT-4 E-45 102.5 96 68 31.267 M16 32
MT-5 E-40 MT-5 E-40 129.5 97 63 44.399 M20 45
MT-5 E-45 MT-5 E-45 129.5 101 68 44.399 M20 45