+91-98150-04628, 91-98155-04628
info@rrmachinetools.com
STUB MILLING ARBOR (MT)
  • Made from 16MnCr5 & case hardened to 55-58 HRc approx.
  • Standard arbour supplied are of draw bolt type (with tapping on rear side).
  • Tang type arbour supplied only against specific request at extra cost.
  • Cotter slot can be provided in Tang type arbours against request at extra cost.
Model No. Shank Taper L
mm
L1
mm
L2
mm
Ø d1
mm
Ø d
mm
Ø D
mm
A/F
mm
M
MT - 3 X 16 mm MT - 3 81.0 46.0 17 23.825 16 32 24 M 12
MT - 3 X 22 mm MT - 3 81.0 46.0 19 23.825 22 40 24 M 12
MT - 3 X 27 mm MT - 3 81.0 46.0 21 23.825 27 48 24 M 12
MT - 4 X 16 mm MT - 4 102.5 51.5 17 31.267 16 32 32 M 16
MT - 4 X 22 mm MT - 4 102.5 51.5 19 31.267 22 40 32 M 16
MT - 4 X 27 mm MT - 4 102.5 51.5 21 31.267 27 48 32 M 16
MT - 4 X 32 mm MT - 4 102.5 62.5 24 31.267 32 58 32 M 16
MT - 4 X 40 mm MT - 4 102.5 62.5 24 31.267 40 68 32 M 16
MT - 5 X 16 mm MT - 5 129.5 56.5 17 44.399 16 32 45 M 20
MT - 5 X 22 mm MT - 5 129.5 56.5 19 44.399 22 40 45 M 20
MT - 5 X 27 mm MT - 5 129.5 71.5 21 44.399 27 48 45 M 20
MT - 5 X 32 mm MT - 5 129.5 71.5 24 44.399 32 58 45 M 20
MT - 5 X 40 mm MT - 5 129.5 71.5 27 44.399 40 68 45 M 20