Description
- C-type Boring head with 25 mm Boring Tool
- Prices are inclusive of Set of Three Allen Key.
- It can be used for boring holes, boring outside circles, boring surfaces, boring stair holes, boring the surface of inside holes, and many multiple processing.
- Can be used with different Shanks R8, MT2, MT3, ISO30, ISO40, BT40, BT50, etc.
- You can use an indexable boring bar with a 25 mm shank to start the minimum diameter of boring. The length of the boring should be LD3 if the boring bar is 25 mm depth of boring should be limited to 75 mm in order to escape chattering.
